Family: paloalto pan-os (v6.10.0)
==================================================
Vendor: paloalto
Family: pan-os
New: No

CLI Commands:
--------------------------------------------------
  L2 Interfaces: show system state filter-pretty sw.dev.runtime.ifmon.port-states
  DNS resolver: show config merged
  DNS resolver: show config running
  DNS resolver: show interface all
  DNS resolver: show interface <intName>
  Power supplies & fans: show system environmentals
  IPsec: show vpn flow tunnel-id <id>
  IPsec: show vpn gateway
  IPsec: show vpn ike-sa
  IPsec: show vpn ipsec-sa
  IPsec: show vpn tunnel
  IPsec: show interface <name>
  IPsec: show inteface all
  L2 Interfaces: show interface all
  L2 Interfaces: show interface <intName>
  L2 Interfaces: show interface management
  DHCPv4 Servers: show interface <intName>
  L2 Interfaces: show vlan all
  L2 Interfaces: show config merged
  L3 Interfaces: show interface all
  L3 Interfaces: show interface <intName>
  L3 Interfaces: show interface management
  L3 Interfaces: show vlan all
  L3 Interfaces: show vpn flow tunnel-id <id>
  L3 Interfaces: show vpn gateway
  L3 Interfaces: show vpn ike-sa
  L3 Interfaces: show vpn ipsec-sa
  L3 Interfaces: show vpn tunnel
  License: request license info
  License: show clock
  MAC: show mac all
  MAC: show vlan all
  Device info: show system services
  Initial device discovery: set cli scripting-mode on
  Initial device discovery: show system info
  Initial device discovery: show system state filter sw.mprelay.s1.dp0.vsys.stats.session
  Initial device discovery: show config merged
  Initial device discovery: set system setting target-vsys none
  Initial device discovery: set system setting target-vsys <vsysName>
  AAA: show config merged
  AAA: show config running
  ARP: show arp all
  ARP: show arp management
  BGP neighbors: show routing protocol bgp peer
  BGP neighbors: show routing protocol bgp summary
  Virtual Contexts: show system state filter sw.mprelay.s1.dp0.vsys.stats.session
  Virtual Contexts: show config merged
  Device info: show system info
  Disable pagination: set cli scripting-mode on
  Device info: show system resources
  Device info: show high-availability state
  Device info: show system state filter sw.mprelay.s1.dp0.vsys.stats.session
  Current config: show config running
  DHCPv4 Relays: show config merged
  DHCPv4 Relays: show interface all
  DHCPv4 Relays: show interface <int>
  DHCPv4 Relays: show interface management
  DHCPv4 Servers: show dhcp server lease all
  DHCPv4 Servers: show dhcp server lease interface all
  DHCPv4 Servers: show system info
  DHCPv4 Servers: show config merged
  DHCPv4 Servers: show dhcp client state <intName>
  DHCPv4 Servers: show interface all

Task Support:
--------------------------------------------------

  Basic discovery:
    ✓ ARP
    ✓ Device info
    ✓ Disable pagination
    ✗ FHRP
    ✓ Initial device discovery
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Virtual Contexts

  Configuration:
    ○ Configuration saved
    ✓ Current config
    ○ Startup config

  Hardware:
    ○ Cluster
    ✓ End of Life data
    ○ Extenders
    ✓ Power supplies & fans

  Hybrid discovery:
    ○ snCheck

  Management:
    ✓ DHCPv4 Relays
    ✓ DHCPv4 Servers
    ✓ DNS resolver
    ✗ IP Flow
    ✓ License

  MPLS:
    ○ Circuit cross-connect
    ○ MPLS forwarding
    ○ MPLS LDP
    ○ VPLS
    ○ VPWS

  Multicast:
    ✗ IGMP
    ○ IGMP Snooping
    ○ MAC multicast address table
    ✗ MROUTE
    ✗ PIM

  Other:
    ○ Cloud network interfaces

  Policy:
    ? NAT44

  Routing:
    ○ Fabric Path

  Routing protocols:
    ✗ BGP Advertised Routes
    ✓ BGP neighbors
    ○ EIGRP
    ○ IS-IS
    ○ Lisp

  SDN:
    ○ APIC
    ○ Cisco ACI

  Security:
    ✗ AAA
    ○ ACL
    ○ DHCPv4 Snooping
    ○ DMVPN
    ✗ Error disabled interfaces
    ✓ IPsec

All Families from paloalto:
--------------------------------------------------
  paloalto@pan-os <-- current
  paloalto@prisma

Legend: ✓=Full, ✗=Not Yet, ○=N/A